Poultry Feed Machine

Poultry feed machines are widely used in large, medium, and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers, and small and medium-sized farms, farmers or large, medium, and small feed processing plants.

The power source of the poultry feed machine can be divided into two aspects: diesel drive and motor drive. According to the actual conditions of different farms, it can also be divided into single-phase electricity and three-phase electricity output modes. Moreover, it is energy-saving and stable, has a small footprint, and is convenient to move. Hourly output ranges from 120kg to 600kg.

Models:

Features of small poultry feed machine:

1. In the process of making feed, the small feed pellet machine will generate high temperatures, which will gelatinize the starch in the material. And then produce a fragrant smell. Increase the palatability of poultry and livestock, and also promote the feed intake of poultry and livestock.

2. The small feed pellet machine is not restricted by seasons, livestock breeds, etc. The user-friendly design of the one-key start button allows people who have never touched this type of machine to operate it as soon as possible. It can also be used to make a variety of livestock feeds. It is durable and does not require too many personnel to operate.

3. The pellet feed made by the small feed pellet machine has a high forming rate and moderate hardness, which is more convenient for poultry and livestock to chew and digest. In the production process, only the pulverized powder is directly put into the feed port, no other steps are required. The pelletized feed is convenient for filling and transportation. The moisture content of the pellet feed is not more than 12%. Therefore, it is easy to store for a long time.

How to use the feed pellet machine?

1. Start the machine only after adding hyperbolic gear oil to the gearbox.

2. Install the pellet machine smoothly, adjust the belt tightness, whether the steering meets the requirements, whether the screws in each part are loose, loosen the adjustment screw on the roller shaft seat, so that the feed machine is in a no-load state, and it can be put into operation after it starts and runs normally. use.

3. Before using the new machine for the first time, take 10 kg of vegetable oil (or grass powder) or waste machine oil, mix well and turn the adjustment screw. Make the two rolling speeds the same. Gradually add refueling feed, while continuing to turn the pressure wheel adjustment screw until the pellets are slowly discharged, the extruded pellets are repeatedly rolled to make the die hole smooth and smooth, and then slowly add the mixed feed to be processed for processing, such as feeling mold The hole resistance is large, the output is low or the material is not discharged. The template can be repeatedly ground according to the above method to make the mold hole smooth and lubricated before processing.

4. In the feed processing, if there is more refined fiber, about 5% of the water should be added. If there is more refined material in the mixed feed, the amount of water added can be reduced as appropriate. After processing, add a little oil that has been mixed with edible oil in advance. Conducive to the next startup, to avoid the feed drying in the hole after the shutdown.

5. After finishing processing, loosen the adjusting screw to make the roller in a free state, and clear up and down after stopping. The remaining material in the warehouse is fouled, especially the remaining material under the swing pan to avoid damage to the suction.

Hot Tags: poultry feed machine, China, manufacturers, factory, buy, cheap, price, for sale, livestock grinder and mixer, Animal Feed Grinder And Mixer, vertical mixer machine, poultry feed grinder and mixer