Pellet Cooling Machine

Name: China Pellet Cooling Machine Manufacturers and Factory - Buy Cheap Price Pellet Cooling Machine for Sale - Fanda Machinery
Brand: Fanda
SKU: 152376179

counterflow pellet cooler, pellet cooling machine

Send Inquiry

Description

Zhengzhou Fanda Machinery Co., Ltd. is one of the leading manufacturers and suppliers of pellet cooling machine in China. With abundant experience, we warmly welcome you to buy cheap pellet cooling machine for sale here from our factory. For price consultation, contact us.

pellet cooling machine Wood pellets discharged from the pellet mill are 70℃－90℃; without cooling, cracks will form on the pellet surface, so cooling is essential. A counterflow pellet cooler can cool pellets from 70℃－90℃ to room temperature quickly and reduce safety moisture by ≤10％. This makes pellets easier to transport, store, and pack.

The counterflow pellet cooler is a popular new type of cooler on the international market-the counterflow cooling principle cools high-temperature, high-moisture pellets.

Pellets feed into the airlock on top of the pellet cooler and fall into the cooling tank. Cold air enters the cooling tank from the bottom of the pellet cooler by suction from the air fan. Inside the cooling tank, hot pellets meet the cold air. As the cold air mixes with the hot pellets, the pellets cool. The cooled pellets are discharged through the discharge door into the discharge chute, while the air fan draws in hot air and dust. The air fan finally emits the hot air from the discharge pipe, and the dust goes to the dust tank at the bottom of the cyclone.

On the pellet cooler, there is a sensor to indicate the level of pellets inside the cooling tank, inside the electric panel there is a time delay, the sensor and time relay work together to control the cooliTimeime and discharTimeime, when pellet level inside the cooling tank reaches the upper level and cooling time reached, the time relay gives a signal to the electric panel, the panel control motor or air cylinder running to open the discharge door, pellets start to go to discharge chute from cooling tank until the level of the pellets inside the cooling tank reaches the lower level the sensor give panel signal to start the motor or air cylinder to close the discharge door and stop discharge pellets.

The whole process runs automatically; the sensors, time relay, and electrical panel control it. If you want to control the cooling process manually, you can use the electrical panel

Usually, we install a vibration sieve under the pellet cooler or a rotary sieve after the pellet cooler to sieve the pellets and remove the small pellets. A counterflow pellet cooling machine

It has a top feeder airlock to prevent air from escaping.
Under the feeder airlock, it distributes evenly inside the cooling tank and prevents them from breaking as they fall.
Equipped with an air fan, cyclone, and dust tank to collect dust and suction air.
Automatically working.
Short cooling timecooling time: can cool pellets from 70℃－90℃ to +3～5℃ above room temperature within 6-10 minutes.
Octagonal cooling tank: temperature and pellet feeding inside the cooling tank are even, ensuring all pellets are the same temperature after cooling and improving cooling efficiency.

Technical data of pellet cooler

Model	SKLN1.5	SKLN2.5	SKLN4	SKLF6	SKLN8
Cooling Capacity (m³)	1.5	2.5	4	6	8
Output for wood pellets (t/h)	1-1.5	2-2.5	3-4	4-5	5-6Cooling time
e (min)	≥6～10 min
After Cooling Temperature	only +3～5aboveof room temperature
Equipped Power(KW)	0.75	0.75	1.5	1.5	1.5
Air Shutter Power(KW)	0.37	0.55	0.55	0.55	0.55
Air volume(m3/h)	5040～7120	10080～12240	16800～20400	25200～30600	33600～40800
Wind pressure(mm)	200	200	200	200	200
Model of air blower	4-72-11NO4A	4-72-11NO5A	4-72-11NO6C	4-72-11NO8C	4-72-11NO10C
Power of air blower (KW)	5.5	7.5	15	22	30