What Should Be Paid Attention To in The Pelletizing Operation Of The Wood Chip Pellet Machine?

What should be paid attention to in the pelletizing operation of the wood chip pellet machine?

1. When the wood chip pellet machine runs continuously for 4 hours, the roller of the equipment should be lubricated at least once. It is also recommended to give a small amount of lubrication every 1 hour of operation (add butter to the roller at the end of each process to prevent the material from entering. The butter in the roller will shrink when it cools and pull the material into the bearing).

2. The main shaft bearing of the wood chip pellet machine should be lubricated every 8 hours.

3. When the wood chip pellet machine works for 2000 hours or every 6 months, the gearbox oil should be changed.

4. Check the oil level of the feeder transmission device on time every week, and add a little oil to the roller chain transmission.

5. Strengthen the lubrication of the bearings of the conditioner and feeder shaft of the wood chip pellet machine once a month.

6. It should be noted that the cutting frame of the wood chip pellet machine should be lubricated once a day, and it is recommended to lubricate manually for more convenient operation.

The above are the details about the emergency bearing lubrication requirements of the wood chip pellet machine during the pelletizing operation. In order to avoid the failure of the wood chip pellet machine during the pelletizing operation and thus affect the output, the wood chip pellet machine must be repaired and maintained at regular intervals.