Carbonization Furnace

Zhengzhou Fanda Machinery Co., Ltd. is one of the leading manufacturers and suppliers of carbonization furnace in China. With abundant experience, we warmly welcome you to buy cheap carbonization furnace for sale here from our factory. For price consultation, contact us.

Carbonization Furnace Introduction:

Wood biomass coconut shell Charcoal carbonization furnace is a kind of new airflow-type carbonization stove, which can also be called a charcoal carbonization stove. It makes charcoal from wood and various biomass materials. It uses advanced hot-air carbonization technology and improves the carbonization rate to 99%, up from 80% in traditional carbonization stoves. Its charcoal-making time is short. This stove is safe and easy to operate, and the charcoal produced in the carbonizing furnace can be used as activated carbon material. Thus, it is widely used in industries such as charcoal making and boiler production.

Technical parameters of the Carbonization Furnace:

What raw materials does a carbonization furnace use?

A new model horizontal bamboo charcoal carbonization furnace stove can directly carbonize fruit trees, bamboo, branches, wood blocks, coconut shells, palm shells, furniture factory scrap, etc.

Gas Recycled

The new environmentally friendly carbonization furnace adds a gas recovery device based on the original carbonization furnace. After flue gas recovery, it can be dust-free and smoke-free. The recovered flue gas can be ignited like liquefied gas for heating, cooking, and baking, and used for the dry machine.

Carbonization is an important part of making charcoal. Carbonization is the core of machine-made charcoal production technology. It's like building a building. Good materials are the foundation underground. Carbonization technology is the above-ground part of the building. Carbonization has three stages: low-temperature exhaust, high-temperature calcination, and cooling. When the slurry rod enters the carbonization furnace, it contains about 8% moisture, which hinders carbonization. Because the slurry rod is highly moisture-sensitive, moisture can seriously affect carbonization quality.

Therefore, drain time is essential.

The moisture removal time is generally 10-15 hours for earth kilns and 2-3.5 hours for machine-made kilns. Long heating time prevents the rods from becoming damp and cracking, ensuring quality carbonization. When the furnace temperature rises to 300 degrees, it produces a large amount of combustible gas. It is reasonable to say that three cubic meters of methane gas can be produced per kilogram of raw materials. These gases are used to heat the furnace. The discharge can be used as a heat source for drying above 400 degrees. The anaerobic closed fire must be sealed during heat preservation and calcination. This can be done by preventing spontaneous combustion or by cooling with water. After the charcoal leaves the kiln, ventilate it before discharging to prevent carbon dioxide poisoning. Place the charcoal coming out of the kiln outdoors for more than 8 hours. This prevents ashes from reigniting and causing a fire.

Hot Tags: carbonization furnace, China, manufacturers, factory, buy, cheap, price, for sale, Charcoal Extrude Machine, Biomass Waste Recyeling Sawdust Charcoal Briquette Making Machine With CE, Small Carbonization Furnace For Charcoal Manufacturer, Wood Sawdust Block Press Machine, New Non Smoke Charcoal Kiln Stove Machine Charcoal Making Machine, Multifunctional Horizontal Carbonization Furnace