How To Choose Ring Die Of Pellet Mill

The choice of ring die:

The ring is an important mold of the granulator. It has a direct impact on the power consumption, output and quality of granulation.

The key to choosing the ring is to choose the appropriate hole and its die.

When the new ring die is finished running, check that the production capacity of the pellet mill and the production capacity of pellets cannot be reached. If it is neither standard nor up to standard in other other aspects, the normal ring die with active operations is not commensurate with the product produced.

After reading this situation, the specifications of the ring mold or the formula of the product mold should be expanded. Only Sanhuan can not be applied to all products, which can achieve the highest production capacity and the highest quality products.

The quality of the products produced, the ability of confectionery and molds are affected by the ring ring design. The thickness of the ring die, the characteristics of the fine wrinkle design other than the time, such as: inlet cone hole, cone hole depth, taper extrusion hole length, outlet cone hole angle and depth, etc., they must be suitable for granulation Specific reasons.

With recovery and heat (steam), pups increase more and appear more easily, and when applicable, can increase production.

For a given ring die, the smaller the feed particles, the more the particles will fight.