Reasons And Solutions For Biomass Fuel Pellet Machine Affecting Production

Reasons and solutions for biomass fuel pellet machine affecting production

The coarseness and moisture temperature of biomass wood chip pellets can be determined by the different apertures of the mold. The discharge port of the feed pellet machine has adjustable lengths and can be operated according to actual conditions. Feed pellets are relatively short and transportation is relatively variable. Ring die pellets are mainly adjusted manually. If the output is not large, it can be properly dried to make the moisture content of the feed about 15%, which is convenient for storage, which is both economical and hygienic. The focus of the work before the biomass wood chip pellet machine is shut down is that when the material is about to end, a small amount of bran is used to stir the edible oil and put it into the machine. The pressing wheel rotates for about 2 minutes and then stops rotating. The edible oil can fill the entire mold hole, which is convenient for the next startup without lubrication and tender production. It can not only maintain the mold but also save time. After stopping, adjust the screws of the pressing wheel to remove the residual raw materials in time.