Precautions When Using A Small Wood Pellet Machine
Aug 11, 2022
Precautions when using a small wood pellet machine
The operator must pay attention to safety when using the small wood pellet machine:
1. The operator should read this instruction manual, be familiar with the performance, structure, and operation method of the small wood pellet machine, and install, debug, and maintain it according to the regulations.
2. Hard impurities should be removed from the feed to avoid damage to the machine.
3. During the production of raw materials, it is strictly forbidden to put your hand into the transmission part and pelletizing cavity of the small wood pellet machine.
4. Always check the wear of the flat die and the pressure roller.
5. If you need to maintain, adjust or inspect the small wood pellet machine, you must cut off the power supply to ensure safety.
6. The motor must be grounded to avoid accidents.
