What Are The Safety Procedures For The Daily Operation Of The Feed Pellet Machine?

What are the safety procedures for the daily operation of the feed pellet machine?

1. Workers wear tight work clothes, do not open cuffs, do not wear gloves, wear protective caps and dust masks, and must concentrate when operating.

2. Check the oil level of the reducer, the oil level of the main shaft bearing, and the roller bearing of the pellet machine.

3. Familiar with the working principle of the machine and the structure and function of each part.

4. Check whether there is debris in the machine and whether the screws are loose, adjust the spindle nut with a wrench and lock it.

5. The motor must be started with no load before it can work. It is strictly forbidden to reverse the direction.

6. It is strictly forbidden to open the door of the machine at will during the production process, and do not reach into the granulation room with your hands.

7. The machine must be grounded safely, disconnect the main power first when checking the machine.

8. When working, check and remove the metal on the magnetic separator at the entrance at any time, pay close attention to the working conditions, and shut down in time if any abnormality is found.

9. Pellet feed with the complete machine?

The auxiliary equipment generally used with the feed pellet machine are pulverizer, feeder, dryer, cooling unit, etc.;