Why Choose Our Wood Pellet Machine

The sawmill pellet machine uses agricultural waste such as straw, wheat straw, and corn stalks as raw materials, and is compressed into a solid biomass fuel that can be directly burned through special equipment through crushing treatment and compression treatment. After briquette, the biomass pellet fuel has a large specific gravity and a small volume, which is convenient for storage and transportation. , Raw coal and other fuels are widely used in heating, living stoves, industrial boilers, biomass power plants, etc.

The main body of the sawing wood pellet machine is an independent rectangular cylinder, on which a closed bearing seat is connected to the powder hopper, and the powder hopper extends out of the machine body. A V-shaped chassis is installed under it, which can be placed indoors at will. The rotating drum of the sawing wood pellet machine particle manufacturing device is placed horizontally under the powder hopper. There are bearing supports at the front and rear. Unscrew a wing nut, the bearing cover and the rotating drum can be drawn out, and the two ends of the placed drum are made with convex square rings, which are embedded in the bearing chamber so that the oil will not penetrate into the powder and will not be stuck by adhesion. The gearbox of the saw wood pellet machine adopts worm gear transmission, the speed ratio is 1:12, the oil can be stored in the box to ensure that the gear is lubricated well and there is no noise. , Equipped with an eccentric shaft, which drives the rack to reciprocate.　　

The two ends of the pressure roller of the sawing wood pellet machine are consistent with the inner and outer ring speeds of the grinding ring, and there is no dislocation friction between the wheel and the mold, which reduces the resistance, reduces the kinetic energy loss, and extends the service life of the mold; the pressure roller is evenly set and runs smooth. It adopts a central pressure regulating structure to adapt to different materials to ensure the suppression effect. Compression molding of sawdust, straw, bark, rice husk, peanut shell, nutshell, pasture, etc. requires a lot of pressure. The service life of the rollers. The structure template is stationary, and the main shaft drives a pressing wheel to press materials, which is suitable for pressing various wood chips, straws, bark, rice husks, peanut shells, nutshells, pasture, and other materials. The sawing wood pellet machine is equipped with φ6--φ12 various aperture molds to adapt to different materials and achieve good results. High centrifugal pressure, suitable for difficult-to-press materials; low wear rate, long use time of pressure wheel and grinding ring, strong material adaptability; long use time of grinding ring; sawing wood pellet machine mold is made of special stainless steel special processing technology; performance The ratio and cost performance are high; on the basis of similar equipment, the technological content and functions of this machine are improved. The sawing pellet machine is packaged as a whole, unpacked, and moved to a suitable place for use, and can be used after being leveled. Electrical wiring device: Pay attention to the direction of rotation and do not reverse it, because one end of the worm has a flat ball bearing, and the direction of force must be on the bearing, otherwise it will cause damage to the other end of the worm to heat up and affect the service life of the machine. If it is out of service for a long time, the sawing wood pellet machine must be wiped and cleaned, and the smooth surface of the machine must be coated with anti-rust oil and covered with a cloth canopy.

Zhengzhou Fanda Machinery Co., Ltd. can provide all kinds of pellets machines, such as wood pellet mills, biomass pellet making machines, animal pellet making machines, biomass pellet production lines, and so on. The machine has good quality and stable performance and long service life.

Vincent:whatsapp:008618639007627

Email:vincent@fandamachinery.com