What Should Be Paid Attention To in The Maintenance And Disassembly Of The Straw Pellet Machine

The straw feed pellet machine absorbs the essence of domestic and foreign pellet machines and is a new energy-saving product. In the past, the feed was generally processed into powder and then fed. There were defects such as inconvenient feeding, poor palatability, picky eating by livestock, and low utilization rate. With the advent and popularization of new small pellet feed machinery, it is now possible to conveniently process powder feed into pellet feed. It can use lighting electricity as the power, and the pellets are pressed out of the die hole under the squeeze of the pressing roller. The length of the pellets can be easily adjusted. The structure is simple, the area is small, and the noise is low. 220V single-phase electricity is enough. The operation, suitable for small farmers who lack three-phase power conditions.　　

The straw pellet machine is straw processing equipment. We must carry out disassembly and maintenance to ensure the smooth operation of the equipment. Here are a few issues that should be paid attention to when disassembling and maintaining.　　

1. Before preparing for disassembly, ensure a good site for disassembly, free of debris, no children, etc. Children are playing love and are interested in everything, and avoid the loss of these equipment parts and harm to children.　　

2. Remove the dirt and oil on the surface before disassembly. Some dirt will definitely be left during the last use. Keep clean during disassembly to ensure smooth maintenance.　　

3. Disassemble as needed. Disassemble as little as possible. Do not disassemble if disassembly is not allowed. When disassembling, make a mark so as not to remember the parts of that part, so as to avoid the phenomenon of wrong installation or less installation, which will affect the work in the future.　　

4. During the disassembly process, the straw pellet machine must be disassembled in order. Use suitable tools for disassembly. Do not knock or hit hard to avoid problems with the equipment parts. Disassemble from the outside to the inside. Disassemble the whole machine first. Assemble, first disassemble the assembly into parts, and disassemble the parts into parts. The parts are large and small, and the small parts should be stored carefully so as not to be lost.