Ways To Increase The Production Capacity Of Wood Pellet Machine

Ways to increase the production capacity of wood pellet machines：

A sawdust pellet machine is a production machine that crushes eucalyptus, pine, birch, poplar, fruitwood, crop straw, and bamboo chips into sawdust and chaff into biomass fuel. The new generation of wood pellet machines effectively solves the shortcomings of difficult pelleting of biological crude fiber and poor effect. The main engine adopts high-efficiency belt transmission, the ring die adopts a quick-release hoop type, and the feeding adopts frequency conversion speed feeding to ensure feeding. The material is uniform, the door cover is equipped with a forced feeder, and the international advanced manufacturing technology is adopted. The manufacturing process can customize high-quality molds for various raw materials for your various pellet machines, which will extend the life of your equipment, improve product quality, and consume ton Costs dropped.　　

How to increase the production capacity of wood pellet machines?

1. Understand the wood pellet machine 　　

If you want to use the wood pellet machine well, you must first understand the wood pellet machine. Before using it, you must read and follow the instructions and operate in the correct way to ensure the normal operation of the equipment and understand the structure and use of the wood pellet machine. Daily maintenance methods such as performance, performance, etc., and good maintenance are all methods that can increase productivity.　　

2. Control of material properties 　　

The nature of the material of the pellet machine should be controlled well, and no items that are not crushed by the pellet machine can enter the pelletizing chamber. This will cause damage to the equipment. Do not put too large materials in the pelletizing chamber. If they are too large, they must be screened first. , It can be placed in the granulating chamber after crushing, and the water content of the material must be controlled, not too much water, the material with too much water will stick to the inner wall of the granulating chamber when the granulator is running, which will cause the normal of the granulator Work.　　

3. Reasonable daily inspection 　　

Before starting up, working, and after shutting down, check the equipment to check whether the parts of each part are defective, whether there are any residues in the granulating chamber, and if there are residues, they must be cleaned in time to avoid clogging. To reduce the service life of the equipment, check the equipment for abnormal noise and vibration when the equipment is working. Doing a good job in the inspection is to ensure the smooth operation of the equipment and increase the production capacity.　　

4. Appropriate grinding and replacement 　　

We have newly purchased equipment as well as the old equipment. The newly purchased equipment needs to grind the mold because the smoothness in the cavity of the new mold does not reach a certain level. We can use a mixture of sand and wood chips. It is enough to perform the pressing several times. The old equipment should pay attention to the replacement of the mold. Because our equipment is used for a long time, the mold will be worn to a certain extent, which may cause the problem of production decline. The mold must be replaced in time.

Zhengzhou Fanda Machinery Co., Ltd. can provide all kinds of pellets machines, such as wood pellet mills, biomass pellet making machines, animal pellet making machines, biomass pellet production lines, and so on. The machine has good quality and stable performance and long service life.

Vincent:whatsapp:008618639007627

Email:vincent@fandamachinery.com