The Reason Why The Motor Temperature Is Too High in The Production Process Of Wood Crusher

The reason why the motor temperature is too high in the production process of wood crusher?

Wood shredder is a kind of mechanical equipment that can be used to recycle all kinds of waste wood after crushing and processing. The whole equipment only needs one motor to drive the production work, but because the power of the motor used is large, In the process of using the production work in our later stage, we must also pay more attention to the safety of electricity use. At the same time, if the motor is found to be abnormal, we must immediately cut off the power supply and carry out corresponding maintenance work. What we want to tell you today is that the wood crusher is in use What is the reason for the overheating of the motor during long-term production work.

Generally, in summer, the heating temperature of the motor will naturally be higher due to the higher temperature. Therefore, when we operate wood crusher equipment in summer, we can put an industrial fan next to the motor to cool down, so as to avoid the motor from being overheated. The high cause causes a series of failures and problems; the second is that the voltage is unstable, because if the voltage is too high, the current of the wood crusher equipment will run at a high load, which will cause the temperature of the motor to continue to rise. At this time, professional The personnel to check the voltage where the problem occurs and then re-connect the power supply to carry out production work after solving; Accelerate the wear of some parts inside the wood crusher, and at the same time greatly reduce the service life of the entire equipment. More importantly, the surface temperature of the motor of the wood crusher equipment continues to rise because of the long-term work under load. High, and even the situation of burning occurs.