Reasons For Too Much Powder In Wood Pellet Machine
Nov 23, 2020
1. If the new material enters the new wood pellet machine for production and there is too much powder, it may be that the compression ratio of the wood pellet machine mold has not been adjusted properly, and the manufacturer is required to debug the wood pellet machine mold that is most suitable for your material. The compression ratio is sufficient.
2. If there is a sudden increase in powder during normal production, one of the possible reasons at this time is that the mold of the biomass pellet machine may have worn out to the end of the service life. It is recommended to replace the mold in time.
3. In addition to the reason of the wood pellet machine mold, another reason may be that the pressure roller skin in the wood pellet machine grain chamber is broken or the pressure wheel is always damaged. Replace it in time.
4. If the three reasons mentioned above for the wood pellet machine itself are excluded, there is another possibility that the moisture problem of the raw material
