Matters Need Attention On Using Feed Pellet Making Machine

Operation matters of feed pellet machine

1. How to use the feed pellet machine: start the machine, pour the mixture into the hopper, the swinging action of the rotating drum, form particles through the wire screen, and fall into the container, such as crushed pieces, should be added gradually, not adding Full to avoid excessive pressure and make the screen vulnerable.

2. Speed selection: Due to the different nature of the raw materials used, the speed is selected, generally according to the viscosity of the material and the degree of dryness and wetness. Dry products are faster, wet products should be slow, but the scope cannot be uniformly specified , It should be determined by the user according to the actual operating conditions.

Precautions for using the feed pellet machine

      1.we should change the previous feeding method and feed evenly. The advantage of the change is that it can make the pellet machine more smooth and keep the pellet machine running at high speed.

　　2. choose a suitable template aperture. Some users use too small apertures, which often result in low output and even no discharge. Then when we buy the pellet machine, we hope to ask the sales staff carefully what aperture template should be equipped.

　　3. adjust the gap between the template and the pressure roller. Appropriate pressure can achieve a good effect on the maturation and compactness of the pellets. There are pressure adjusting screws on the feed pellet machine to adjust the balance and tighten the pressure screws on both sides.

　　4. keep the pellet machine clean during use. Users often do not pay attention to keeping the pellet machine clean during use, which speeds up the loss of the pellet machine's service life, so we must pay attention to keeping the pellet machine clean.