What Is The Cause Of The Sawdust Pellet Machine Not Working？

What is the cause of the sawdust pellet machine not working？

　　 1. Foreign matter has entered the machine. Before we put the raw materials into the pellet machine, we did not make a good inspection, which caused these foreign objects to enter the machine, which caused the machine to stop working suddenly. Especially for old machines, many parts tend to be aging, and the speed is inherently slow. If foreign objects enter again, it is likely to brake suddenly. And these foreign objects, such as stones, are also a challenge for new machines, so you should pay attention to whether there are any obvious foreign objects before feeding, so as not to cause damage to the machine.

2. Check the power socket, plug, and power cord of the pellet machine for oxygen loss or breakage. If not, plug in the power supply to test the machine. When the motor is energized and does not move, when the wheel is moved slightly by hand, It can be concluded that the capacity of one of the two starting capacitors of the machine is missing. In this case, it is generally only a new product.

　　 3. It may be that the power supply is short-circuited or the fuse is broken. This is also a very common situation. When the fuse is overworked by high-power use, it will blow. If this is the case, you will need to change another insurance line. But it should be noted that aluminum fuses should be used instead of copper fuses. In the past, many people chose copper wire as a fuse, which is very dangerous, because the spread of copper wire is rarely high and generally will not blow, and the function of the fuse is to remind us to pay attention to the voltage problem when the voltage is too high. Using copper wire means that the fuse has lost its function. This must be noted.