Maintenance Method Of Automatic Feed Wood Crusher

Maintenance method of automatic feed wood crusher：

Plan repair content

1. Daily maintenance: Mainly daily lubrication and cleaning of wood shattering machines, tightening components, adjustment mechanisms, etc.
2. Regular cleaning of oil and replacement: Wood crusher with poor working conditions, cleaning and changing lubricating oil on a regular basis.
3. Regular inspection: Check the wear status of each component, and it is expected that the number of parts will be replaced during the next repair.
4. Plan repair: Generally divided into three types: small repair, medium repair, and large repair. The small repair workload is the smallest, changing some components in a short period of time, which can be disintegrated some parts. Harmony of productivity; large repair is the biggest repair. During the overhaul, all parts must be relieved, repaired, and replaced with the specified accuracy and performance.
Repair quota
The repair quota is the basis for preparing the repair plan and organization, and it is based on science, experiment, and experience. The interval time, type, repair organization, and labor volume of wood crusher maintenance.
1. Repair cycle
The repair cycle refers to the time interval between two adjacent repairs. For the new wood crusher, the time interval from the beginning to the first repairs. The length of the repair cycle mainly depends on the use period of the main components, and the service life of the parts is determined by factors such as the working conditions, production types, and parts materials of the wood crusher, and the characteristics of the use of wood shattering machines.
2. Repair cycle structure
The repair cycle structure refers to the number of repairs, medium repairs, and small repairs within the repair cycle of i.
3. Repair work quota
The repair work quota is the labor time standard required to complete the various repair work of the wood shatter. Determine the amount of repair and the number of people required, including repair and stop repair quotas. Repairing the working hour quota is to determine the working hours consumption standards for each type of work. Mainly depending on the type of mechanical wood shattering machine, the complexity of the structure, the wear of the wood crusher and its own technical status, and according the technical level of the repair, the degree of experience, and the connection of each repair process, etc. It plays an important role.