Daily Operation Precautions Of Feed Pellet Machine

Daily operation precautions of feed pellet machine

First of all, the operator should be responsible for the work, in strict accordance with the operation rules of the feed pellet machine operation, boot, stop must be in accordance with the procedure.

(1) Keep dry steam,0.3-0.4 kg pressure into the conditioner;

② Adjust the distance of die roll. Generally 0.2mm to 0.5mm, the press can slightly roll, do not be too tight or too loose, too tight will shorten the life of the press die, too loose the roll will slip;

(3) The moisture requirement of raw materials is generally between 12%-13%, and the moisture of raw materials after conditioning is about 14%-14.5%, which must be fed evenly;

(4) Current according to the specified load control, absolutely can not overload production for a long time, which is the main cause of equipment damage;

(5) Pay attention to the fluctuation of feed particle electrical flow in normal production, and stop the machine for inspection in time if any abnormality is found;

After the new equipment is put into production, feed particle machine transmission box continuous work for 500 hours should be replaced with oil, according to the production situation generally 3-6 months to replace the oil once, replace 68# oil or 100#-120# industrial gear oil;

⑦ feed granule machine resistance machine, must be adjusted to loosen the press roller, wait for the inner wall of the die cleaning can be restarted, eliminate in the blocked state of forced start, more not allowed to use pipe clamp to pull the tooth shaft, feed granule machine in the normal working state, the press roller needs 2 hours to add a lubrication;

⑧ often check the wear and tear of feed granule machine, avoid equipment sudden failure and ring die cracking.

Reasons for cracking of ring die: a. hoop wear, not tight ring die; b, the transmission key and die lining wear, so that the die can not be positioned; c. The spindle loosens, resulting in the press roll jumping and striking ring mold; d. Foreign bodies enter the ring mold; e. Feed pellet machine is forced to start due to blocked ring die; f. There are quality problems in the ring die itself.

So feed pellet machine is the main key equipment of feed enterprises and new and old farmers, feed pellet machine can operate normally, directly affect the economic benefits of enterprises, so the correct operation of feed pellet machine is very important.