What conditions are required for the normal operation of the mobile wood crusher?

What conditions are required for the normal operation of the mobile wood crusher?

In order for the wood grinder to carry out production operations smoothly, it is necessary for our mobile wood crusher manufacturers to do a good job of testing each process before the equipment leaves the factory, and we cannot let unqualified wood grinder equipment leave the factory. This is also to ensure After the wood crusher is in the hands of the user, the first condition is that the production operation can be carried out smoothly. The second is that after the wood crusher is accepted by the user, it needs to cooperate with the manufacturer to ensure that the production operation of the wood crusher can be carried out smoothly.

First of all, we need to place the mobile wood crusher equipment on a stable ground for production operations, and in the process of placement, it also needs to be determined according to the site and feeding method. Generally, small wood shredder equipment does not require too much debugging. Direct power on for production operations, but for some large-scale wood crusher equipment, we need to install and debug under the guidance of the manufacturer's technical staff, and ensure that there is no problem before turning on the power supply for production operations; before operating the wood crusher for production operations Before, the operator should first follow the instructions to check the circuit, oil circuit and confirm whether the link is safe and normal. The tension of each chain, V-belt, and transmission mechanism is generally adjusted when the equipment leaves the factory or the factory installer is on site. Adjustment, the user should check frequently in future use; because the blades inside the wood shredder are forged from high-quality alloy steel, after a long period of use, if there is wear or the angle is changed, the tightness of the blade can be loosened. Fix the screw, remove the blade for grinding and adjustment, and replace it with a new blade of the same specification when the wear is excessive.