How to avoid overload operation of the mobile wood crusher?

How to avoid overload operation of the mobile wood crusher?

The mobile wood crusher is a mechanical equipment that can crush and process a variety of waste wood, such as some branches, branches, trunks, wood blocks, wood boards, wood chips, leftovers, leftovers, boards, waste wood, Waste wood and other waste can be processed by wood crushers, and these crushed materials can be recycled reasonably, but we may encounter problems in the process of using wood crushers for production operations. In the case of overloaded production, if the wood crusher is allowed to perform production operations in this state for a long time, not only the energy consumption is very high, but also the wear of some internal components will be accelerated, thereby reducing the service life of the entire equipment and The effect of use, so how can the wood crusher avoid overloading?

First of all, we need to ensure a good feeding speed, such as too fast or too slow feeding will cause bad effects, too fast feeding will cause the wood crusher to perform production work under overload, and for feeding If the material is too slow, the wood crusher will work in an idling state for a long time, and the output and crushing efficiency will drop significantly. Therefore, we must maintain a uniform speed for feeding, so as to ensure that the wood crusher is stable. The state of production work; secondly, we also need to pay attention to the size of the waste wood fed, because according to the size of the model of the wood crusher, there are also mandatory requirements in terms of feeding requirements, if the volume of raw materials fed is too large It will cause the wood crusher to be in an overloaded state for production, so when encountering excessively large waste wood, we can simply process it and then feed it to the wood crusher for processing.