the instructions of how to use Wood Shredder

How to use Wood Shredder? 

1. Turn on the power and see if the steering is correct.
2. When installing and changing the tool, the knife edge extends 2-4mm from the plane of the cutter head, and then tighten the screw.
3. To change the expansion and contraction of the knife, it must be consistent in length and length.
4. When the length of the knife is adjusted and the grains are not reasonable, replace the sieve with different apertures.
5. It is strictly forbidden to put firewood with stones and nails into the machine to prevent the knife and internal parts from being damaged.
6. Pay attention to checking the hammer screw, if it is found to be loose, fasten it immediately. If the hammer and screw are seriously worn, they should be replaced.