How to add lubricating oil to the wood pellet machine?
Sep 02, 2024
How to add lubricating oil to the wood pellet machine?
When we use the wood pellet machine, the lubrication system inside the equipment is an indispensable part of the entire production line. If the wood pellet machine lacks lubricating oil when it is operating, the wood pellet machine cannot operate normally. Because the pressure of the wood pellet machine during operation is very huge, the friction between the raw materials will generate a lot of heat when making pellets, which will cause the equipment to be high temperature and deformed. Now let the technicians tell you what the requirements for emergency bearing lubrication of the wood pellet machine are when producing pellets:
1. When the wood pellet machine runs continuously for 4 hours, the pressure roller of the equipment should be lubricated at least once. It is also recommended to give a small amount of lubrication every 1 hour of operation (add butter to the roller at the end of each process to prevent material from entering. The butter in the roller will shrink when it cools, and eventually pull the material into the bearing).
2. Lubricate the main shaft bearing of the wood pellet machine every 8 hours.
3. When the wood pellet machine works for 2000 hours or every 6 months, the gearbox oil should be changed.
4. check the oil level of the feeder transmission device on time every week, and add a little oil to the roller chain transmission.
5. strengthen the lubrication of the bearings of the conditioner and feeder shaft of the wood chip pellet machine once a month.
6. finally, it is necessary to lubricate the cutter frame of the wood chip pellet machine once a day, and it is recommended to lubricate manually for more convenient operation.
The above are the details about the emergency bearing lubrication requirements of the wood chip pellet machine in the pelletizing operation of the wood chip pellet machine. In order to avoid the failure of the wood chip pellet machine during the pelletizing operation and affect the output, the wood chip pellet machine should be repaired and maintained at regular intervals.
