Common faults and solutions of charcoal briquette-making machine
Aug 31, 2023
Common faults and solutions of charcoal briquette-making machine
The charcoal briquette-making machine is responsible for the molding of the salary rods on the entire charcoal production line. Only when the salary rods are qualified can the subsequent carbonization work be carried out. Therefore, the importance of the charcoal-making machine in the entire production line is very important. In the production of charcoal, The sawdust briquette-making machine will inevitably have various problems. Let's talk about the common faults and solutions of the charcoal-making machine.
1. The briquette charcoal-making machine does not produce rods. The reason is that the heating temperature is too high or too low, the molding sleeve of the sawdust briquette-making machine is seriously worn, the angle of the screw propeller is inconsistent, and the moisture content of the raw material is too large. Our company's charcoal machine adopts an automatic temperature control device, and the forming sleeve is made of high-alloy material, which is resistant to compression and wear.
2. The salary rod is not formed because of improper temperature control, excessive raw material moisture, wear of the propeller of the sawdust charcoal-making machine, improper shaft tip, blockage of the exhaust hole, too large or too small screw of the propeller head of the rod making machine, and the sleeve Severe wear and tear, etc.
3. The quality of the salary stick is not high. Too much moisture in the raw material will easily cause transverse cracks in the rod body, and too little moisture will easily lead to the appearance of longitudinal cracks. In addition, if the heating temperature is too high, the raw material will be excessively softened, resulting in insufficient feeding, which will also lead to cracks. Insufficient material supply in the feeding barrel, you can appropriately increase the diameter of the spiral, or polish the spiral wall to increase the distance between the spirals.
