How To Use The Wood Pellet Machine Correctly?

How to use the wood pellet machine correctly?

The wood pellet machine has been used for a long time, and the output will gradually decrease and cannot meet a series of requirements. There are also many reasons for the decline in output. It may be that the user improperly operates the wood pellet machine equipment when using it, causing some parts of the wood pellet machine to be damaged, or there are no correct factors when installing it. If the production does not meet the requirements of the standard, it is a headache and affects the development of the enterprise. In order to improve production, we can take the following measures:
1. The wood pellet machine can be adjusted at a suitable angle, which is conducive to reducing the thickness of the material and realizing the screening of ultra-thin layers. As we all know, when the feed speed is too large, it will cause serious material accumulation, which will not only result in a decrease in the efficiency of the screening, but also it may damage the screen, which is very bad.
2. Increase the power of the wood pellet machine motor. The power of the motor is the main source of power for the screening work and the main force for the complete screening work. Appropriately increase the power of the motor to improve the production of the wood chip machine.
3. Another is to adjust the mesh data of the wood pellet machine. The length of the screen determines the screening efficiency, the output of the screen width (wood pellet machine, you can adjust the feeding method so that the material must be fed all along the screen width, increase the opening rate of the wood pellet machine mesh, through the wood pellet machine screen opening rate, more material will be per hour; reduce the batter porosity of the screen, if the screen is blocked, it will reduce the amount of material passing through the screen, thereby reducing production and keep the screen holes unobstructed, which is also one of the good ways to increase production.