How To Operate The Carbonization Stove

Operation process of carbonization stove:

Put the wood in first, the closer the better, both dry and wet wood are fine

Then heat it up at the bottom of the furnace

Looking at the temperature display on the horizontal carbonization furnace

When the furnace heats up to between 250-300 degrees

The wood in the furnace will be heated due to a lack of oxygen

flammable gas will be produced

After passing through the pipeline, the gas will return to the bottom of the furnace and continue to heat up and carbonize.

That is to say, only the first two to four hours need us to heat with wood,

When the flammable gas comes out

The furnace will automatically heat up and carbonize

In the later stage, if the carbonization temperature exceeds 500 degrees

And if the excess gas heat source is too large

We open the temperature control valve,

Releases excess gas, allowing it to burn in the air

thereby reducing the temperature

When the combustible gas inside the furnace burns out

The carbonization part has been completed

Then wait another 12 hours for it to cool down completely

open the carbonization furnace

Take out the finished charcoal

The whole carbonization process is so simple,

In fact, the whole carbonization process is like cooking at home with a fire