How To Batch The Feed Pellet Machine?

A feed pellet machine, also known as a pellet feed machine, feed pellet mill, or pellet feed forming machine, belongs to feed pelletizing equipment. It is a feed processing machine that uses corn, soybean meal, straw, grass, rice husk, etc. as raw materials, and directly compresses them into pellets after crushing the raw materials. Many farmers are very familiar with it. How to scientifically prepare ingredients and install and debug machinery in dairy farming is a very important link. Let's introduce how to batch the feed pellet machine and what is the installation and debugging method of the feed pellet machine. Let's take a look!

How to batch the feed pellet machine？

1. What ratios of raw materials were used in the past can still be used today, but the ratio of fine materials to coarse materials should be considered.

In fact, when many farmers get the feed pellet machine, they think that the feed formula must be replaced accordingly. Generally speaking, the feed pellet machine can compress more than 50 kinds of raw material powders into granules, so if you used corn, bran, and other raw materials before, you can still use these raw materials to granulate now. However, if the proportion of roughage is relatively large in your feed formula, it is necessary to consider the formation of pellet feed. Too much roughage will result in more pelleted feed powder. Generally, the ratio of concentrated feed to rough feed is 3:2 in the feed formula, and pellet feed can be made.

2. The feed pellet machine can not only granulate medium raw materials but also can granulate various raw materials.

Some farmers asked the author: "Is it possible to granulate only one raw material when using a feed pellet machine?" In fact, it is not. If multiple raw materials are granulated together, these raw materials need to be crushed one by one first and then granulated. A variety of crushed raw materials are put into the feed mixer for stirring. The pellet feed made in this way has comprehensive nutrition and high palatability.

3. In the process of using the feed pellet machine, there is no need to add water and additives.

We know that the pellet feed made by the feed pellet machine basically has a relatively high degree of maturity, and the high temperature of the feed pellet machine can kill some viruses and bacteria contained in the feed. At this time, there is no need to add additives during the granulation process. Moreover, the feed that passes through the feed pellet machine is dry-in and dry-out, and the water content of the pelleted feed is generally controlled at about 10%, so as to ensure that the feed can be stored for a long time and is not easy to be damp. So in the process of granulation, water is also unnecessary.