Introduction of corn peeling and grits making machine

Overview of corn peeling and grits making machine：

Corn peeling and grits making machine (also called corn ballast machine, rice ballast machine, corn hazelnut machine, corn grits machine, etc.), this machine uses corn kernels as raw materials to complete cleaning, peeling, and degerming of corn at one time. Root removal, black navel removal, crushing, grits removal, grading, and polishing are all completed at one time. Corn grits of different grain sizes and cornflour of different meshes can be produced, and the finished corn kernels are smooth in color and clean without umbilicals. , You can directly enter the large supermarkets and grain and oil wholesale markets.

the working video for corn maize peeling and grits making machine :

The working principle of corn grits making machine：

This machine is a combined primary corn processing equipment, which is composed of four major systems: peeling system, crushing system, grading system, and air-net dust removal system. It solves the historical technical difficulties of corn processing machinery such as stuffiness and slow removal of impurities. The special current display system makes the internal pressure of the machine studio and the peeling effect of the material clear at a glance, and a new automatic adjustment system for discharging has been added. The machine has been in the best working condition and is the most advanced corn grain processing equipment in China. . When corn, rice, wheat, etc. enter the dehulling chamber from the hopper, they will travel to the exit under the rotation of the propelling ribs. In the dehulling chamber, due to the gradual reduction of the volume of the working chamber and the influence of the mechanical resistance, the density between the rice grains increases. , The squeezing and matcha effect in the machine is enhanced, the roller is constantly turning and advancing, the friction and peeling action between the parts, so that the rice grains can not be removed. The decontaminated corn kernel enters the crushing system. Under the crushing and traction of the traction clutch crushing device, the material travels in the crushing process, enters the grading system, and is automatically separated to obtain corn flour, corn grits, and corn grits, and pass The windscreen dust removal system cleans and removes dust, and the product obtained is bright in color and excellent in taste.

Install corn grits making machine:

It must be noted during installation that one of the three live wires entering the motor must pass through the ammeter, and the rotation of the motor wheel should be counterclockwise; the elasticity of the V-belt should be appropriate, not too loose or too tight; after the installation, let the machine idling for two minutes, pay attention to whether the machine is There are vibrations and abnormal noises.

operate corn grits making machine:

(1) Preparation before starting up Corn peeling generally adopts the wet peeling method. The moisture content of the corn entering the machine is required to reach 16-17%, and the moisturizing time is about 10 minutes. It is only necessary to moisten the lower skin. Water on the surface of the corn is strictly prohibited. Otherwise, stuffiness should occur.

(2) Operation and shutdown: After starting the machine and operating normally, open the feed plate and control the material flow at the feed port according to the power load. During operation, if any abnormal sound is found, stop the machine for inspection immediately. When the car is stuffy, you should close the feeder, turn the motor wheel slowly by hand, remove the corn in the cabin, and start the machine again.

If you want the corn grits making machine, please contact:

Vincent:whatsapp:008618639007627,

Email:vincent@fandamachinery.com