How to use household pellet feed machine

1. When the new feed pellet machine is used for the first time, it must be run in before use, otherwise it will not work normally.

2. Before turning on the feed pellet machine, add less powder before turning it on. When shutting down, leave a small amount of feed in the machine to prevent the press roller of the machine from contacting with the template and running idly.

3. After using the feed pellet machine for a certain period of time or pressing out a certain amount of pellets, if the pellets produced are broken or pellets. 4. If the feed is not solid, turn the top of the mill pan to the bottom and use the mixed feed to add 2% -4% water. When the pellet machine is working, it is forbidden to reach into the feeding port. If necessary, you can use a wooden stick to help feed.

5. If the machine is stuck in operation, stop it immediately, press the pressure roller until the bolt is loose, and then restart the machine.

6. After each work, the pressure roller must be adjusted to loosen the bolts.

7. Be sure to check the tightness of the belt frequently to prevent problems such as low machine output and belt slippage.

8. When the feed pellet machine is used for the first time, it needs to work under low load for 40 hours, and then change the gear oil in the gearbox. After 100 hours of regular replacement, all bearings should be regularly filled with grease