Coconut shell carbonization furnace is popular in Southeast Asian countries

In foreign countries, such as Thailand, Indonesia, Vietnam, the Philippines, etc., especially in countries or places rich in coconuts, a large amount of waste coconut shells are wasted every year. But what everyone does not know is that coconut shells can be used as waste and turned into treasure. Smart people have long begun to use waste coconut shells to make charcoal, and the profits obtained are also very considerable.

Coconut shell carbonization furnace is popular in Southeast Asian countries

Method 1 for making charcoal from coconut shells:

People collect discarded coconut shells and use environmentally friendly methods to produce environmentally friendly smokeless charcoal. The first step is to carbonize the coconut shells smokelessly. The worker puts the coconut shells into the carbonization furnace, seals the furnace after installing it, and then starts to ignite from the bottom of the furnace. The furnace begins to heat up for carbonization, and the time can be determined according to the size of the furnace. When the temperature reaches the temperature and cools down, the coconut shell becomes coconut shell charcoal. Open the furnace door to take out the coconut shell charcoal, and then proceed to the next step. Put the coconut shell charcoal into the ball mill and grind it into a fine powder, then put the fine powder into the mixer for stirring. When the coconut shell carbon powder is evenly stirred, put it into the rod-making machine or the forming machine for secondary extrusion, so that the carbon rod is formed. At this time, the charcoal is still wet and needs to be carbonized again, and then put into the carbonization furnace for carbonization again. The charcoal particles condense and solidify again so that environmentally friendly smokeless carbon is produced. Such charcoal will not have powder, and even if it is touched by hand, it will not leave any traces.

Method 2 for making charcoal from coconut shells:

People put the collected coconut shells into the crusher for crushing first and then put the crushed coconut shells into the drum continuous carbonization furnace, feed them from the feed port, and finally enter the smokeless carbonization chamber for high-temperature carbonization after passing through the drying pipe. At this time, the water in the coconut shell is completely evaporated after high-temperature carbonization and then flows out along the discharge pipe. At this time, the coconut shell becomes coconut shell charcoal. At this time, the coconut shell charcoal is dry, crisp, and has a crisp sound, and has the highest carbon content. This coconut shell charcoal is ready. It can be used in other places, such as for barbecues, heating, tea making, water purifiers, etc.