The Structure Principle And Technology Of Rice Husk Pellet Maker Machine

Rice husk pellet machine, also known as sawdust pellet machine and wood chip pellet machine, can smash branches, tree branches, board scraps, miscellaneous wood, corn cob, 10-30 cm sticks, and other materials into sawdust, granules, sawdust-like products Materials; these materials produced can be used in the material preparation section of light industries such as papermaking, particleboard, edible fungi, sawdust board, MDF, fiberboard, etc.
Rice husk pellet machine structure:
The structure principle of the rice husk pellet mill is the same as that of other wood pulverizers, and it is composed of a cutting device, crushing device, and fan. The cutting device is composed of a cutter head and a blade. The cutter head is made of cast steel, and the blade is made of alloy steel and durable; the crushing device is composed of a hammer, a crushing cavity, a rotating shaft, a wear-resistant plate, and a screen. The hammer will be crushed again; the fan is composed of a motor and a dust removal device. Generally, small wood pellet machines such as 400-700 wood pellet machines do not have this fan device.
Rice husk pellet machine principle:
After the material enters the machine, in the process of mutual rotation between the high-speed rotating grinding disc and the side teeth plate, the material is roughly crushed by strong friction and shearing, and then enters the main surface of the crushing chamber to be crushed and screened at the same time, so as to achieve the required filtration rate. After sieving, it is discharged from the bottom, and those that do not meet the requirements continue to be crushed. There is a crushing effect in any movement of the main surface of the crushing chamber, not only the material and the main surface of the blade, between the main tooth plates, and any self-shearing and self-friction between the material and the material can crush the material. In order to prevent superfine and light materials from causing eddy current circulation in the crushing chamber, a fine powder de-chamber recycling bag is provided in the tangential direction of the crushing chamber. The pulverized material is discharged and collected through the gap between the screen bars that control the fineness below.