Correct Use Method Of Feed Pellet Machine

Cattle and sheep feed, fish feed pellet machine is a pellet of pellets, feed processing pig, cattle, sheep, and other feed processing. For the use of pellet feed machines, many friends also said that it is very simple and does not require any professional skills.

The simple operation of a large number of feed pellets for cattle and sheep is the operation of the feeding machine from the feed port, and then the pellet machine operation, and the pellets come out from the discharge port. This is indeed the case, but in the process of use. There are a few small points to note.

1. The material needs to be crushed below 6mm

Only the feed grinder is a must-have for the feed pellet machine. Only the feed crushed by the feed mill can be processed by the pellet machine. This is enough. By smashing everyone's operations, everyone has a better understanding of the general situation. The crushing size of the particles is related to the diameter of the particles in contact. The large-diameter particles you want to disperse will soon be crushed into larger numbers. For example, if your bulk material reaches 5 mm, then the material needs to be crushed below 5 mm.

But often in the process of use, and not such a high use process. The feed pellet machine manufacturer recommends that you crush the feed below 6mm and send it all to all feeds.

2. Need to stay at around 13%

Before many feed pellet machines for cattle and sheep were used, many people thought that this feed pellet machine was just feed, crushed, and then used the pellet machine. Out of this, this requires a strong demand for the pellet machine.

The pellet machine manufacturers keep the remaining feed at about 13%.

3. Need speed feeding

Many people have not paid attention to this point. Whether the feed pellet machine is running faster, whether the feed pellet machine is working normally, and whether the occurrence of pellets is normal. If the material is loaded, it is easy to stuffy the machine. If the feeding is slow, it is easy to cause the pellet machine to run empty. High-speed feeding can be maintained, the normal operation of the machine can be ensured, and the working efficiency of the pellet machine can be improved.

If you feel that manual feeding is troublesome, you can use your own feeder instead of manual feeding.