What is the reason for the biomass pellet machine not producing pellets?
Jul 12, 2022
What is the reason for the biomass pellet machine not producing pellets?
1. The raw material moisture is not suitable, too much or too little moisture can not make the granules form, because our granulator is made by physical pressing, without any addition of chemical components, the adhesion is achieved through the combination of appropriate moisture and suppression Therefore, the moisture of raw materials is one of the important factors.
(Generally, it is most suitable to control the moisture content of raw materials within 15%-20%. Of course, the specific situation depends on the type of raw materials.)
2. The compression ratio of the mold is not correct; the compression ratio and moisture are both equally important factors. One is controlled by the raw material and the other is controlled by the mold. The two ratios are indispensable. The compression ratio must be communicated with the manufacturer. Pay special attention The point is: For example, some time ago, when the sawdust particles were suppressed, it was suddenly found that the sawdust was not enough, and other miscellaneous wood was added, which would seriously affect the production! Because the compression ratio of different kinds of raw materials is different, if you have a variety of raw materials, you should communicate with the manufacturer to prepare more molds
3. The gap between the pressure roller and ring die is not adjusted properly. In the case of equipment testing, our company's technicians will hand it over to the customer for use and debugging, so as to avoid the situation of no material. But it depends on what your actual situation is, and the right medicine can be better and faster.
