What Are The Current Burning Methods Of Forage Pellet Machines?

A pasture pellet machine is a piece of mechanical equipment that presses pasture into cylindrical feed pellets suitable for cattle, sheep, pigs, etc.

　　 Pasture pellet machine saves time and labor, has low power and high output. The whole set of equipment is driven by only one motor, which works stably and consumes less energy. The use of large-diameter press rollers has a large output, high granulation rate, uniform granules, high granule strength, mature inside of granules, smooth surface, easy to store, which helps sheep and pigs to absorb and reduce diseases.

　　 Forage pellet machine has a small footprint, small investment, high return, low noise, and high performance. The shell is made of steel, the strength and toughness are greatly enhanced, and there will never be shell fracture. All bearings adopt a sealed structure, which effectively prevents dust from entering, improves the working environment of the bearing, and prolongs the life of the bearing.

　　 Pasture pellets help the health of livestock, reduce indigestion, and fully absorb the nutrients in the pasture. Many breeders say that pigs, sheep, etc. are not good at producing feeds. They are obviously malnourished and grow slowly. The important thing is that they often get sick and cause headaches. After the pasture is made into pellets, it is easier for the livestock to absorb, reduce the occurrence of diseases, and enable the livestock to better absorb nutrients and achieve balanced nutrition.

   How long the forage pellet machine burns is not certain. It is different in different combustion methods and in different burners. The same weight of coal and straw can not be said that the length is also related to the combustion method and the burner.

   The current combustion methods of forage pellet machines mainly include the following: Layered combustion, also known as fire-bed combustion, is only suitable for solid fuels, and is the main combustion method for small boilers. Layered combustion has a wide range of adaptability, but the air and combustibles mix badly, the combustion reaction is slow, and black smoke sometimes appears. Suspension combustion, also known as fire chamber combustion, is suitable for solid, liquid, or gaseous fuels, and is the main combustion method for large and medium-sized boilers. Suspension combustion does not require a grate, the fuel and air contact area is large, the ignition is rapid, the burnout rate is high, the combustion efficiency and boiler thermal efficiency are high, and automatic control can be realized. However, there are many types of equipment, complex systems, and high energy consumption.

    What are the signs before the pellet machine malfunctions? Teach you how to solve it. After the pellet machine produces the pellets, it is found that the surface of the pellets is uneven or even there are many excess wounds on the pellets. This problem indicates that there is a problem with the blade inside the pellet machine. If the blade is intact, the surface of the pellet produced is very good. It is smooth and almost equal in size. The surface of the particles is too smooth, which is also a problem. This can indicate that the mechanical hardness is too high, the ring dies compression is relatively small, and the compression hole should be enlarged. This phenomenon is relatively rare, and this problem is rarely encountered, but it is also It is necessary to avoid as much as possible during early construction. The first thing to do is to check the raw materials before construction to see if there are any hard objects. This is very important.

If you need a wood pellet mill, biomass pellet making machine, animal feed pellets making machine, please contact:

Vincent: Email: vincent@fandamachinery.com

Whatsapp:008618639007627