How To Make Laundry Detergent

Laundry liquid production process:
1. First, the tap water passes through the water treatment equipment, and is filtered layer by layer to remove deionized water such as water electrolytes, minerals, etc., and store the deionized water in the water storage tank;
2. Weigh the required raw materials for standby, and use the batching bucket for batching;
3. Add an appropriate amount of water to the stirring liquid through an automatic water meter;
4. Put the prepared detergent raw material formula into the mixing tank in turn, and stir evenly;
5. Take a sample to check whether the finished product is qualified, and release it after passing;
6. The finished product comes out of the outlet of the reaction tank and is stored in the finished product tank through the filter;
7. Let it stand still and wait for the detergent to defoam before filling;
8. Cap, label, code, seal, etc. after filling.
Water is the main body of laundry detergent. To produce qualified laundry detergent, the water must first be purified. It is necessary to purchase a set of water treatment equipment, and then purchase a set of laundry detergent production equipment with emulsification function. Light mixing equipment is not good, easy to stratify, precipitate, deteriorate, etc. At the same time, an ozone generator is also required. The gas produced by the ozone generator has the function of sterilization and disinfection, which can decompose the bacteria, viruses, and toxic substances in the raw materials. The laundry liquid produced is easier to store and will not change in quality.
We also need a filling machine, that is, after the laundry detergent is produced, we need to fill it into packaging bottles. If there is no washing liquid, it can only be filled manually. This is not only slow and inaccurate, but also more or less easy. Then we have to buy an encoding machine to print the production date. Basically with these five pieces of equipment, we can start production.