How To Maintain The Blades Of The Wood Chipper

   How to maintain the blades of the wood chipper to extend the service life? Whether it is a garden branch shredder, wood shredder, wood chipper, blade is an indispensable important part, because it directly affects the working efficiency of the branch shredder. This is undoubtedly a factor that needs to be paid more attention to for manufacturers who pursue quality.

   The working intensity of the branch shredder is relatively high. When the shredder works for a period of time, the temperature of the blade will be very high. If the heat dissipation efficiency is not high, the life of the blade will be greatly affected, and the quality of the crushed product will also be affected. So here is a tip for the user to add appropriate water during the normal operation of the wood chipper blade, so that the temperature of the high-speed working tool can be reduced. Every time you turn on the machine, check whether the blade of the machine is damaged or notched. If you find that the blade is no longer sharp, remove it and polish it. At present, the secondary reinforcement of blades in the crushing series such as garden branch shredders, wood shredders, sawdust shredders, miscellaneous wood shredders, and template shredders are used for secondary reinforcement, which is the surface heat treatment technology. The blades of the shredder are carburized and nitrided. Such skills can improve the durability and oxidation resistance of the tool. This keeps the blade sharp while maintaining the blade itself.

   At present, the blades used by most manufacturers are made of alloy steel. In fact, two different metal materials are welded together under high temperature conditions. Although this material is sharp, it is also easy to break. Therefore, it is required to pay attention not to have hard objects such as iron or stone mixed into the feeding port when feeding.

    When working, properly adjust the amount of material fed, too much will easily cause overload and stop, and too little will affect the cutting efficiency. If there is a blockage during work, it is not allowed to forcibly feed it with hands or iron rods, and it should be shut down immediately to clear it. During work, if an abnormality is found or an abnormal sound is heard, the machine should be shut down for inspection immediately. The power supply must be cut off before the inspection. It is forbidden to troubleshoot while the machine is running. Each movable part is filled with butter once a day, and the main bearing needs to be filled with lithium-based grease once every 300 hours. When stopping work, let the machine idling for two minutes, blow off the dust and weeds in the machine, and then shut down.