How to solve the problem that the output of the sawdust charcoal making machine is all broken
Jul 09, 2023
How to solve the problem that the output of the sawdust charcoal making machine is all broken
1. Adjust the discharge height of the charcoal briquette machine
If the rod machine is stuck or the speed is too fast, it may cause the output to be all broken. During the production process, the discharge height of the sawdust charcoal machine needs to be adjusted to a suitable position. When the discharge plate is adjusted too high, the material is baked too soft, and the sticks that come out will break. When the discharge plate is adjusted too low, it will be difficult for the charcoal briquette machine to discharge the material smoothly, and it will also cause the problem that the rods are all broken when discharged.
2. Replacement of sawdust charcoal making machine accessories
Regular replacement of wood briquette machine accessories is very helpful to avoid the situation that the output is all broken. For example, if there are scratches on the surface of the discharge plate of the charcoal machine, the wooden handle will also break due to the increased friction when rolling. At this time, it is necessary to replace the discharge plate of the charcoal maker machine. In addition, if the processing tool of the charcoal machine is severely worn, it should be replaced in time to ensure the processing effect.
3. Adjust the processing speed of the sawdust briquette machine
In the production process, the processing speed of the wood briquette machine needs to match the properties of the material, and the processing speed cannot be too slow or too fast. If the processing speed is too fast, the pressure on the material will increase, and the rod will be easily broken. If the processing speed is too slow, for some relatively hard materials, it is also very easy to appear that the output is all broken.
