How to ensure the molding rate of the wood pellet machine

How to ensure the molding rate of the wood pellet machine？

1. The best raw material moisture for pressing wood pellets is between 15%-20%. If the moisture is too high, the pressed pellets will be loose and easily broken during packaging and transportation. If the moisture is too low, it will cause pellets. Difficult to press, low particle forming rate, too much powdery material. Therefore, it is recommended that you reduce the moisture of the material by drying or drying and increase the moisture of the material by adding water. In the molding process of wood pellets, the increase in particle molding rate can save a lot of raw materials, reduce production costs and increase user profits. At the same time, strictly follow the operating procedures in operation to reduce errors.

  2. The size of the crushed material is required. Before entering the straw pellet machine, the straw and other materials must be crushed by the straw crusher before entering the straw pellet machine, and the size of the damaged area should match the diameter of the straw pellet machine you want to make and the aperture size of the straw briquette machine mold. The size of the damaged particles will directly affect the output value of the straw pellet machine and even result in no discharge.

If you need a wood pellet making machine, biomass pellet mill, animal feed production line,  please contact:

Vincent:whatsapp:008618639007627

Email:vincent@fandamachinery.com