How to ensure that the pellets produced by the pellet machine meet the requirements
Nov 25, 2020
Pellet machine, straw pellet machine, biomass pellet machine, wood pellet machine, etc. When using the pellet machine, there will inevitably be some small faults. Here is how to solve it:
1. After the pellet machine produces pellets, it is found that the surface of the pellets is uneven or even there are too many wounds on the pellets. This problem indicates a problem with the blades in the pellet machine. If the blade is intact, the surface of the resulting particles is very smooth and almost in size. Both are relatively common.
2. The surface of the particles is too smooth, which is also a problem. This can explain that the mechanical hard material is too high, the ring die compression is relatively small, and compression holes should be added. This phenomenon is relatively rare, and this problem is rarely encountered. However, It is necessary to avoid it as soon as possible. The first thing to do is to check the raw materials before construction to see if there are hard objects, etc. This is very important.
3. When the water content of the particles is too high, the phenomenon of blocking the machine often occurs. Therefore, we tried to construct after testing the moisture of the particles. If the moisture is too high, we should dry or dry it, and try to avoid using it when wet. This will increase the load on the machine and affect the normal operation of the pellet machine.
4. The machine itself has cracks on the pellet machine. This phenomenon is very obvious. Generally, you will hear the pellet machine from the sound. The pellet machine will make a lot of noise during operation, or the noise is very loud. This phenomenon indicates that there is a Error, so we have to stop running the check. After the pellet machine is put into use, we often encounter problems with the quality of the machine itself. Most of the reasons are caused by customers' long-term use. So we must pay attention to this when running the pellet machine.
