Classification of feed processing machinery

Depending on the processing objects and processing technology, feed processing machinery can be divided into the following categories.

1. Essential feed processing machinery

It is used to process all kinds of grains, mainly including feed crusher, feed granulator and feed flatter. Among them, the feed flatter uses a pair of relatively rotating tooth rollers or light surface rollers to press the cooked grains into pieces of machinery.

2. Cake residue, cake meal feed processing machinery

Oil crops obtained by the hydraulic oil press with a cake residue with a diameter of about 250 to 600 mm. It can be crushed with a cake crusher and used as a feed. The cake residue obtained by the spiral oil press and the cakes obtained after the leaching method can be used after the leaching method.

3. Coarse feed processing machinery

It is mainly used for processing dry grass, green feed and crop straw. Commonly used stem shattering machines, stems, feed crusher, grass suppressor and feed pressure particle. The stem tuning machine uses an alkaline method to treat crop straw, that is, spray the harsh sodium or other alkaline solutions through the small holes on the pipeline to the chopped straw, fully mix during the conveying process, promoting the straw in the straw straw Lyrin decomposition to improve its digestion, remove mold, and have disinfection effects. The grass suppressor is to compress the chopped dried grass and other coarse feeds into pieces, and its density can reach 600 to 1,000 kg/cubic meter, which is convenient for transportation and storage. It can be sent directly into the feed trough when feeding. Its working principle is similar to the feed pressing machine, but the size of the grass is large.

4. Jude feed processing machinery

Mainly processing potato and melon vegetables. Commonly used: ① Block -rooted washing machine. Used to clean the roots and stems such as potato, radish. There are three types of roller, claws and spiral types, and are used more in spiral. At work, the roots and stems are sent to the other end from one end of the roller (or spiral) to the other end, which is cleaned due to mutual friction, collision, and the impact of water flow. ② Slice wire cutting machine. The main working parts are a vertical, horizontal or tilted knife. The straight -edged blade or shaved knife can be replaced above, which is used to cut the feed into slices or silk. ③ The vegetable cutting machine is also known as the green feed shatter. There are two types of stand and horizontal type. There are more use of the formula, and there are two on the top of the knife plate, with 6 to 8 U -shaped knives on the side. Cut the feed into finely crushed when turning around. ④ Feed pulp machine. It consists of a berry pool, a high -speed rotor, a shield and a rack with a blade. In the operation, inject clean water into the pulp. Under the high -speed cutting and impact of the blade, juicy feed is processed into a paste -like feed.

5. Mixed rare feed modulation machinery

It is mainly used to modulate mixed feed for pig feed, there are two types: intermittent and continuous. The intermittent modulator uses a large cylindrical -shaped feed mixing can, and the interior is driven by a dynamic paddle -type mixing device. Put a variety of powder feed and water (or liquid with additives) in a mixed tank in a certain proportion, and then stir in the mixed tank. After the pump or compressing air is used to send the scarcity to the feed trough through the pipeline. The continuous modulator consists of a firing box, a liquid box, and a feed mixing tank pump and a feed distribution pump equipped with paddle -type mixing device. The spiral conveyor in the lower part of the powder box sends the powder into a mixing tank continuously, and the liquid pump will be continuously sent to the mixed tank from the liquid box. The mixed rare feed feed distribution pump is delivered to the feed tank through the pipeline, and the amount of powder and infusion can be adjusted to control the proportion of the two in the rare feed.

6. Cooperate with feed processing units and complete sets of equipment

It is used to prepare powder or granular coordination of feed. Combined with the feed processing unit, it usually only combines the feed crusher and the feed mixer to produce powder -like coordination or mixed feed. In conjunction with the feed set of equipment, it is composed of parts such as removal cleaning equipment, feed crusher, feed ingredient meter, feed mixed machine, dust removal equipment, finished packaging equipment, control system and other parts. Warehouses and conveying devices connecting each stand -alone machine. It is generally used to process powder -like coordination or mixed feed. If you need to make a particle feed, add the feed pressing machine, cooling device and vibration grading.