Operation instructions of horizontal carbonization furnace

Operation instructions of horizontal carbonization furnace:

1. When burning raw charcoal in a horizontal carbonization furnace, the wood should be placed in the furnace in order. Smaller wood should not be placed on the bottom of the furnace, because the bottom of the furnace will be heated for a long time and easily broken.

2. After the ignition starts, as the temperature rises, the moisture of the wood will be discharged as the temperature rises. At this time, you cannot reduce the salary rod at will, but continue to add the salary rod. At this point, you should keep an eye on the temperature gauge and always remember to open a valve at the back of the stove. The purpose is to let the wood tar inside run down so as not to clog the pipes.

3. When the temperature reaches a certain level, flammable gas is generated. At this time, the burning of salary sticks cannot be stopped. Just reduce the payroll increase.

4. When the combustible gas burns out, it proves that the carbonization furnace is carbonized. At this time, you need to wait patiently until the temperature drops, and you can't open the furnace door at once, which is easy to cause an open flame. Instead, you have to wait for the temperature to drop to about 50 degrees and not be hot, you can open the furnace door to collect charcoal.